hfa-7095 (Lubricity improvers)
® WRT bvMATERIAL SAFETY DATASHEET
Revision: 4
Revision date: December 2002
1. CHEMICAL PRODUCT
- Product name: HFA - 7095
- Product type: lubricity improver
- Product description: an aliphatic and aromatic hydrocarbon solution of organic esters
2. COMPOSITION/ INFORMATION ON INGREDIENTS
see under 1
3. HAZARDS IDENTIFICATION
- Physical/chemical Hazards: not classified
- Environmental Hazards: the product can initially have, in an aqueous environment, harmful effects
- Health hazards: after swallowing or vomiting the product can come into the lungs, what will lead to suffocation or chemical pneumonia. Hazardous if swallowed, the product is non-corrosive
4. FIRST AID MEASURES
- On skin: Remove splashes on the skin with a lot of water and soap.
MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY - In eyes: Remove contact lenses and rinse immediately with plenty of water for at least 15 minutes.
MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY - If swallowed: Do not induce vomiting.
MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY - Inhalation: Remove to fresh air. Keep at rest. Seek medical advice if patient does not quickly recover.
MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY
5. FIRE FIGHTING MEASURES
- Fire fighting procedures: water, foam
- flashpoint: >80 ºC
- Protective Clothing: Wear self-contained breathing apparatus pressure demand and full protective gear
6. ACCIDENTAL RELEASE MEASURES
- Cleaning up: Dike and absorb spill with inert materials. Dispose off according to state or other applicable laws and regulations
- Environmental Precautions: avoid runoff into storm sewers and ditches which lead to waterways
- Personal precautions: wear suitable clothing (see section 8)
7. HANDLING AND STORAGE
- Handling: Avoid contact with skin and inhalation mist or vapours
- Storage: Keep product on a dry place in a closed packing. Avoid contact with bases
- Packaging material: Stainless steel, HDPE
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION
- MAC: 38 mg/m3
- Preventive Measures: Launder clothing before re-use. Good general ventilation is necessary
- Personal protective equipment: wear nitril rubber gloves, safety glasses and protection gloves. If significant vapours, mist or aerosols are present, use NOISH approved respirator or equivalent
9. PHYSICAL AND CHEMICAL PROPERTIES
- Appearance: liquid
- Colour: brown
- Odour: aromatic
- pH: -
- flash point: 65 ºC
- Density (20ºC): 0,9168 gr/cm3
- Solubility: oil, naphtha, aromatic solvents. not dispersible in water
- Pour point: -12ºC
- Viscosity (20ºC): 437mPas
Note: This data are typical for the product and are not a specification.
10. STABILITY AND REACTIVITY
- Stability: Stable under normal conditions
- Conditions to avoid: -
- Hazardous Decomposition Products: thermal decomposition/dissection can form the following products: carbon dioxide, carbon monoxide and sulphur dioxide
11. TOXICOLOGICAL INFORMATION
This information is based on knowledge of the present substances and on toxicological data from similar substances.
- Skin contact: caustic, repeated or prolonged contact can cause dehydration and degreasing of the skin. LD50>(rabbit) 12500 mg/kg
- Inhalation: inhalation of vapours can cause irritations
- Ingestion: LD50>(rat) 40000 mg/kg (surfactant, calculated on product).The product is irritating
12. ECOLOGICAL INFORMATION
- biodegradable
- low bioaccumulation potential
- beaker test showed (28d) 51 % biodegradability
- water hazard Class 1
13. DISPOSAL CONSIDERATIONS
Disposal method: dispose of material in accordance with federal, state, local or applicable laws and regulations.
14. TRANSPORT INFORMATION
not applicable
15. REGULATORY INFORMATION
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.
16. OTHER INFORMATION
The information contained herein relates only to the specific material identified. WRT BV believes that such information is accurate and reliable as of the date of this material data sheet, but no representation, guarantee or warranty, express or implied, is made as to the accuracy, reliability or completeness of the information. WRT BV urges persons receiving this information to make their own determination as to the information's suitability and completeness for their particular application.