WRT bv, HFA Oil Additives ® HFA Oil Additives ®

hfa-1024 (Dehazers)

® WRT bv
MATERIAL SAFETY DATASHEET

Revision: 3
Revision date: January 2003

1. CHEMICAL PRODUCT

  • Product name: HFA 1024
  • Product type: de-hazer for gasoils
  • Product description: oil soluble , water dispersable demulsifier / wetting agent

2. COMPOSITION/ INFORMATION ON INGREDIENTS

  • Blend of surface active ingredients Cas-nr.: 68412-54-4
  • Aromatic solvent.

3. HAZARDS IDENTIFICATION

  • Physical/chemical Hazards: -
  • Environmental Hazards: the product can initially have, in an aquaeous environment, harmful effects.
  • Health hazards: after swallowing or vomiting the product can come into the lungs, what will leed to suffocation or chemical pneunomia. Hazardous if swallowed, the product is corrosive.
  • Hazards classification: R 36/38, 51/53

4. FIRST AID MEASURES

  • On skin: Remove splashes on the skin with a lot of water and soap.
    MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY
  • In eyes: Remove contact lenses and rinse immediately with plenty of water for at least 15 minutes.
    MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY
  • If swallowed: Do not induce vomiting. Drink milk or water.
    MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY
  • Inhalation: Remove to fresh air. Keep at rest. Seek medical advice if patient does not quickly recover.
    MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY

5. FIRE FIGHTING MEASURES

  • Firefighting procedures: powder, foam or CO2
  • Protective Clothing: Wear self-contained breathing apparatus pressure demand and full protective gear

6. ACCIDENTAL RELEASE MEASURES

  • Cleaning up: Dike and absorb spill with inert materials. Dispose off according to state or other applicable laws and regulations.
  • Environmental Precautions: avoid runoff into storm sewers and ditches which lead to waterways.
  • Personal precautions: wear suitable clothing (see section 8)

7. HANDLING AND STORAGE

  • Handling: Avoid contact with skin and inhalation mist or vapours.
  • Storage: Keep product on a dry place in a closed packing, not below 0ºC..
  • Pakaging material: Stainless steel, HDPE.

8. EXPOSURE CONTROLS/ PERSONAL PROTECTION

  • Preventive Measures: Launder clothing before re-use. Good general ventilation is necessary
  • Personal protective equipment: wear nitril rubber gloves, safety glasses and protection gloves. If significant vapours, mist or aerosols are present, use NOISH approved respirator or equivalent.

9. PHYSICAL AND CHEMICAL PROPERTIES

  • Appearance: clear liquid
  • Colour: amber
  • pH: 5 - 8 (1 % solution)
  • flash point: > 47 ºC
  • Pour point: -7 C
  • specific gravity: 1,038 gr/cm 3
  • Solubility: oil, naphta, aromatic solvents. Dispersible in water.
  • Viscosity (20ºC): 255 mPas

Note: This data are typical for the product and are not a specification.

10. STABILITY AND REACTIVITY

  • Stability: Stable under normal conditions
  • Conditions to avoid: -
  • Hazardous Products: thermal decomposition/dissection can form the following products: carbon dioxide, carbon monoxide

11. TOXICOLOGICAL INFORMATION

  • This information is based on knowledge of the present substances and on toxicological data from similar substances.
  • Skin contact: caustic, repeated or prolonged contact can cause dehydration and degreasing of the skin. LD50> 2000 mg/kg.
  • Inhalation: inhalation of vapours can cause irritations.
  • Ingestion: Small acute toxicity.

12. ECOLOGICAL INFORMATION

  • EC50 48 hr Dafnia > 2-6 mg/l
  • Bio-degradation BOD 28 days < 15 %, DOC 28 days > 65 %.
  • This information is based on knowledge of the present substances and on toxicological data from similar substances.
  • The product is dispersible with water. In case the product penetrates into the ground, it spreads out and can pollute subsoil water. The product is biodegradable, it can bio-accumulate and is poisonous for organics in water treatment plants.

13. DISPOSAL CONSIDERATIONS

  • Disposal method: dispose of material in accordance with federal, state, local or applicable laws and regulations.
  • Product disposal: leftovers and contaminated product must be removed as chemical waste.
  • Polluted packing Material: Empty packing material well and present it for recycling or destruction.

14. TRANSPORT INFORMATION

  • UN-nr.: 1268
  • ADR: 3.31C
  • RID: 3.31C

15. REGULATORY INFORMATION

  • R-Phrases: 35/36, 51/53
  • S-Phrases: 26, 37/39, 61

16. OTHER INFORMATION

The information contained herein relates only to the specific material identified. WRT BV believes that such information is accurate and reliable as of the date of this material data sheet, but no representation, guarantee or warranty, express or implied, is made as to the accuracy, reliability or completeness of the information. WRT BV urges persons receiving this information to make their own determination as to the information's suitability and completeness for their particular application.

® WRT bv
Strawinskylaan 3067
1077 ZX Amsterdam
The Netherlands
tel.: +31 20 644 28 31
fax.: +31 20 642 39 62
info@wrtbv.com
www.wrtbv.com