hfa-360 (CFPP improvers)
® WRT bvMATERIAL SAFETY DATASHEET
Revision: 7
Revision date: February 4, 2003
1.CHEMICAL PRODUCT
- Product name: HFA - 360
- Product type: Diesel/Gas oil additive
- Product description: Olefin derivative which is extremely effective as a flow improver and pour point depressant in middle distillates.
2. COMPOSITION/ INFORMATION ON INGREDIENTS
- olefin polymer
- aromatic/aliphatic solvent
- other compounds
3. HAZARDS IDENTIFICATION
Human health:
- R22 Harmful if swallowed
- R36/38 Irritating to eyes and skin
4. FIRST AID MEASURES
- On skin: Remove splashes on the skin with a lot of water and soap.
- In eyes: Remove contact lenses and rinse immediately with soft water stream for several minutes. Keep the eyelids wide apart.
MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY - If swallowed: Do not induce vomiting. Drink milk or water. If large quantities have been swallowed,.
MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY - Inhalation: Remove to fresh air. Administer artificial respiration if breathing is stopped. Keep at rest.
MEDICAL ATTENTION SHOULD BE SOUGHT IMMEDIATELY
5. FIRE FIGHTING MEASURES
- Extinguishing media: Use water spray jet, foam, carbon dioxide, dry chemical.
- Protective Clothing: Wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
- Cleaning up: Dike and absorb spill with inert materials and collect for disposal in accordance with federal, state or other applicable laws and regulations.
- Environmental Precautions: Avoid runoff into storm sewers and ditches which lead to water-ways.
- Personal precaution: Avoid contact with skin and eyes. Ensure adequate ventilation. Wear appropriate protective equipment.
7. HANDLING AND STORAGE
- Handling: Ensure good ventilation/suction at the workplace. Avoid open flames and sources of ignition.
- Storage: Ensure that storage and workrooms are adequately ventilated.
- Packaging material: SS, Epoxy coatings, HDPE.
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION
- Engineering measures: Access to eye wash fountain.
- Personal protection: Safety goggles. Protective gloves at prolonged or repeated exposure.
9. PHYSICAL AND CHEMICAL PROPERTIES
- Appearance: liquid
- Colour: amber
- Odour: Aromatic
- Flash point: 47°C
- Boiling point: 150°C
- Pour point: < -15°C
- Density (15°C) 0,905 - 0,910 kg/l
- Solubility: Oil, naphtha, diesel
- Viscosity 35,00 - 36,50 cST at 20°C
Note: These data are typical for the product and are not a specification.
10. STABILITY AND REACTIVITY
- Stability: Stable under normal conditions. In fire CO/CO2 may be generated.
- Conditions to avoid: Not applicable
- Materials to avoid: -
11. TOXICOLOGICAL INFORMATION
- This information is based on knowledge of the present substances and on E.C. toxicological data from similar substances.
- Toxicological data: Oral rat LD50> 9000 mg/kg
- Primary skin irritation (rabbit): non irritating
- Ingestion: Minimal toxicity
- Skin contact: Dermal/rat LD50> 4000 mg/kg. Can cause dehydration of the skin.
- Inhalation: Rat/4h LC50> 5mg/l
- Eye contact: Irritating. Will cause slight eye discomfort, but will not injure eye tissue.
12. ECOLOGICAL INFORMATION
- This information is based on knowledge of the present substances and on E.C. toxicological data from similar substances.
- Persistence and degradability: Not applicable
- Aquatic toxicity: Not applicable
13. DISPOSAL CONSIDERATIONS
- All local and national regulations should be followed.
14. TRANSPORT INFORMATION
| ADR: | 3,III UN-number 1993 Hazard no: 30 Kerosene |
| RID: | 3,III UN-number 1993 Hazard no: 30 Kerosene |
| ADNR: | 3,III UN-number 1993 Hazard no: 30 Kerosene |
| IMDG: | 3 / III UN-number 1993 Kerosene |
| IATA: | 3 / III UN-number 1993 Kerosene |
| IMDG: | EmS: 3-07 |
| ADR: | Solution |
| RID: | Solution |
| ADNR: | Solution |
| IMDG: | Solution |
| IATA: | Solution |
15. REGULATORY INFORMATION
E.EC Marking and labelling:
- E.C.
- Symbol:
- R-Phrases: 22, 36/38
- S-Phrases: 26, 37/39
16. OTHER INFORMATION
The information contained herein relates only to the specific material identified. WRT BV believes that such information is accurate and reliable as of the date of this material data sheet, but no representation, guarantee or warranty, express or implied, is made as to the accuracy, reliability or completeness of the information. WRT BV urges persons receiving this information to make their own determination as to the information's suitability and completeness for their particular application.